The DAP-3220 Wireless 108G Exterior Access Point is supports 64/128/152-bit WEP data encryption and WPA/WPA2 security functions. In addition, it provides MAC Address Filtering to control user access, and the Disable SSID Broadcast function to limit outsiders’ access to the internal network. UmbulTech is not going to tell you about the The D-Link DAP-3220 Wireless 108G Exterior Access Point of feature and benefits. But UmbulTech want to inform you about the Technical specification about this D-Link DAP-3220.

Technical Specification of D-Link DAP-3220 Wireless 108G Exterior Access Point

Standards
+ IEEE 802.11b/g WLAN
+ IEEE 802.3/802.3u Ethernet
+ IEEE 802.3x Flow Control

Ethernet Interface
+ 10/100BASE-TX Ethernet port

Radio and Modulation Type
For 802.11b:
DSSS:
+ DBPSK @ 1Mbps
+ DQPSK @ 2Mbps
+ CCK @ 5.5 and 11Mbps
For 802.11g:
OFDM:
+ BPSK @ 6 and 9Mbps
+ QPSK @ 12 and 18Mbps
+ 16QAM @ 24 and 36Mbps
+ 64QAM @ 48 and 54Mbps
DSSS:
+ DBPSK @ 1Mbps
+ DQPSK @ 2Mbps
+ CCK @ 5.5 and 11Mbps

Operating Frequency
For 802.11b:
+ 2400 to 2497MHz
For 802.11g:
+ 2400 to 2483.5MHz

Channel Numbers
+ 11 Channels (FCC)
+ 13 Channels (ETSI)

Data Rates 1
+ 802.11g: 108,54, 48, 36, 24, 18, 12, 9 and 6Mbps
+ 802.11b: 11, 5.5, 2, and 1Mbps

Maximum Transmit Output Power 2
17dBm (typical)

Antennas
Embedded 9dBi patch antenna
RN-P N type connector for optional antenna5

Receiver Sensitivity
+ For 802.11b, at 8% PER:
11Mbps: –83dBm
2Mbps:–89dBm
+ For 802.11g, at 10% PER:
6Mbps:–87dBm
9Mbps:–86dBm
12Mbps:–85dBm
18Mbps:–83dBm
24Mbps:–80dBm
36Mbps:–76dBm
48Mbps:–71dBm
54Mbps:–66dBm

Security
+ 64/128/152-bit WEP data encryption
+ WPA-PSK, WPA2-PSK
+ WPA-EAP, WPA2-EAP
+ TKIP, AES support
+ MAC address filtering user access
+ WLAN STA partitioning
+ Multiple SSID for network segmentation
+ SSID broadcast disable function
+ 802.1Q VLAN Tagging
+ Rouge AP detectionl

Quality of Service
+ Wireless Multimedia (WMM)

Configurable Operation Modes
+ Access Point
+ WDS with AP
+ WDS
+ Wireless Client

Performance Enhancement
+ AP grouping for load balance

Device Management
Web Browser Interface:
+ HTTP
+ Secure HTTP (HTTPS)
AP Manager II
SNMP support:
+ D-View module
+ Private MIB
Command Line Interface:
+ Telnet
+ SSH

Diagnostic LEDs
+ Power
+ LAN
+ WLAN

Accessories Provided for Outdoor Installation
+ PoE base unit
+ Ethernet cable (4 meters long)
+ Set of grounding wires
+ Wall mount
+ Pole mount (option) 3

Operating Voltage : 48VDC +/- 10% for PoE
Power Consumption : + 13.5 watts (max.) with PoE (with heater ON) 4
Dimensions : + 190 (L) x 160 (W) x 55 (H) mm
Weight : + 649g (Without mounting kit)
Operating Temperature : -20˚ to +60˚ C
Storage Temperature : -20˚ to +65˚ C
Operating Humidity : 10% to 90% non-condensing, all-weather enclosure
Regulation Certification
+ FCC Class B
+ CE
+ IP 65
+ C-Tick

Related posts:

  1. Specification of D-Link DCM 202
  2. VeriFone VX610 Specification
  3. D-Link Air DWL-700 AP Wireless Access Point