UmbulTech.Com » Wireless

Hardware installation for D-Link DCS-3430-Wireless Network Camera

UBL — Thu, 29 Jul 2010 05:12:21 +0000

You know that the Wireless Day and Night network camera D-Link DCS-3430 already certified by DGPT ? I’m not going to inform you about the type approval process but i just want to inform you a simple step for hardware installation of the D-Link DCS-3430.

The D-Link DCS-3430 Day & Night Network Camera is a powerful surveillance system that can connect to your network. The DCS-3430 differs from a conventional PC Camera because it is a stand-alone system with a built-in CPU and Web server, providing low-cost solution capable of solving demanding security and home/office monitoring needs. It is designed with an aluminum cast for maximum heat dissipation and better protection. Snapshot enables you to save a snapshot image directly form a Web browser to a local hard drive without installing any software. H.264 can reduce the size of video stream around 80% compared with the Motion JPEG and as much as 50% when compared with MPEG4. Using less network bandwidth and storage space allows the DCS-3430 to be a very cost effective network camera.

With 0.5 lux light sensitivity, the DCS-3430 is capable of capturing video in rooms with minimal lighting. With optional Day & Night Auto Iris lens, IR LED lens or night vision illuminator, you can customize your surveillance application to enable low light or night vision video streaming. You can also zoom in using the DCS-3430’s 16x digital zoom feature. The DCS-33430 gives you the ability to monitor video and audio in you home/office using an Internet browser anywhere in the world! Simple installation procedures, along with the built-in Web-based interface offers easy integration to your network environments.

Hardware Installation for D-Link DCS-3430 Day & Night Network Camera(1). Attach the Antennas (DCS-3430 only)
Locate the antennas included with your DCS-3430, and attach them to the antenna connectors
located on the back of the DCS-3430.

(2). Connect the Ethernet Cable
Connect an Ethernet cable to the network cable connector located on the Network
Camera’s back panel and attach it to the network.

(3). Attach the External Power Supply
Attach the external power supply to the DC power input connector located on the Network
Camera’s back panel (labeled DC 12V) and connect it to an AC power outlet.

Note: When you have a proper connection, the LED will turn red. The light may cycle on
and off and your computer may show an intermittent loss of connectivity, this is normal
until you have configured your Network Camera.

Connect Using Power-Over-Ethernet
Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the DCS-3411/3430 will turn red to
indicate a proper connection.
The Network Camera comes with a camera stand with a swivel ball screw head that can be attached to the Network
Camera bottom socket cavity. Attach the camera stand to the Network Camera and station it for your application. There
are holes located in the base of the camera stand allowing the Network Camera to be mounted to the ceiling, or any
wall securely.

Done for Hardware installation for D-Link DCS-3430-Wireless Network Camera

Technical Specification of Mobile Wireless Router D-link DIR-412

UBL — Tue, 23 Mar 2010 10:51:44 +0000

You know that the Mobile wireless Router D-Link DIR-412 allows you to connect a 3.5G USB adapter for mobile broadband connectivity. The incoming connection is then shared via a 802.11n wireless network. The standard Ethernet port can be used as an primary or backup connection.

3 points of benefits for D-Link DIR-412 are as below:

Provides high-speed connectivity in areas without conventional 802.11 wireless access
Compatible with DO/CDMA/HSUPA/UMTS networks
Supports WAN failover for persistent connections

The technical specification of Mobile Wireless Router D-link DIR-412 are as below:

Compatible mobile Networks1

-1 x EV-DO/CDMA
-HSUPA/HSDPA/UMTS

Standards
-IEEE 802.11g
-IEEE 802.11b
-IEEE 802.3
-IEEE 802.3u

Wireless Security
-64/128-bit WEP (Wired Equivalent Privacy)
-WPA & WPA2 (Wi-Fi Protected Access)
-WPS (PBC/PIN)

FIREWALL
-etwork Address Translation (NAT)
-tateful Packet Inspection (SPI)
-MAC Filtering
-Website Filtering

VPN
-L2TP/PPTP/IPSEC VPN Pass-through
-PPTP/L2TP Connection

Ports
-1 x Ethernet (RJ-45)
-1 x USB 2.0
-ANTENNA
-Internal antenna

LED Status Indicators
-Power
-nternet
-Wireless
-Ethernet
-WPS

DIMENSIONS (x W H)
- 122 x 97 x 27 mm

OPERATING TEMPERATURE
-0˚ to 40˚C (32˚ to 104˚F)

OPERATING HUMIDITY
-10%-95% (Non-condensing)

POWER
-DC 5V/2.5A +/- 5%

Advanced Features
-3G Modem / Ethernet WAN Backup
-Auto WAN Failover
-QoS Management

CERTIFICATION
-CE
-FCC
-ROHS Compliant

Verizon Wireless Goes Rugged With The Casio G’zOne Rock

UBL — Fri, 20 Nov 2009 05:00:04 +0000

Verizon Wireless and CASIO today introduced the new CASIO® G’zOne (pronounced Jeez_wun) Rock™ to Verizon Wireless’ growing line-up of rugged phones. Perfect for customers with active lifestyles, the Rock’s advanced G’zGear software operates in six modes, including Earth Compass, Walking Counter, Thermometer, Astro Calendar, Sunrise Sunset and Tides, with the help of its Triple Sensor technology. Whether your lifestyle has the demands of an avid fisher, hunter, hiker or climber, the Rock is prepared to handle life’s most challenging obstacles while providing directional information, Push to Talk capabilities and connectivity over the nation’s largest and most reliable wireless voice and 3G network.

Installation Considerations

UBL — Wed, 13 May 2009 05:11:11 +0000

We think that you have read our previous posted about technical specification of DAP-3220, Today Umbultech is going to inform you the 5 important point about the DAP-3220 installations. The D-Link DAP-3220 lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

Keep the number of walls and ceilings between the DAP-3220 and other network devices to a minimum – each wall or ceiling can reduce your DAP-3220’s range by 3-90 feet (1-30 meters). Position your devices so that the number of walls or ceilings is minimized.
Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle, the wall appears to be over 42 feet (14 meters) thick! Position your devices so that the signal will travel straight through a wall or ceiling – instead of at an angle – for better reception.
Building materials can impede the wireless signal – a solid metal door or aluminum studs can have a negative effect on range. Try to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways, and not through other materials.
Keep your product away – at least 3-6 feet or 1-2 meters – from electrical devices or appliances that generate RF noise.
If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even when the phone is not in use.

D-Link DAP-3220 Specification

UBL — Wed, 06 May 2009 08:53:01 +0000

The DAP-3220 Wireless 108G Exterior Access Point is supports 64/128/152-bit WEP data encryption and WPA/WPA2 security functions. In addition, it provides MAC Address Filtering to control user access, and the Disable SSID Broadcast function to limit outsiders’ access to the internal network. UmbulTech is not going to tell you about the The D-Link DAP-3220 Wireless 108G Exterior Access Point of feature and benefits. But UmbulTech want to inform you about the Technical specification about this D-Link DAP-3220.

Technical Specification of D-Link DAP-3220 Wireless 108G Exterior Access Point

Standards
+ IEEE 802.11b/g WLAN
+ IEEE 802.3/802.3u Ethernet
+ IEEE 802.3x Flow Control

Ethernet Interface
+ 10/100BASE-TX Ethernet port

Radio and Modulation Type
For 802.11b:
DSSS:
+ DBPSK @ 1Mbps
+ DQPSK @ 2Mbps
+ CCK @ 5.5 and 11Mbps
For 802.11g:
OFDM:
+ BPSK @ 6 and 9Mbps
+ QPSK @ 12 and 18Mbps
+ 16QAM @ 24 and 36Mbps
+ 64QAM @ 48 and 54Mbps
DSSS:
+ DBPSK @ 1Mbps
+ DQPSK @ 2Mbps
+ CCK @ 5.5 and 11Mbps

Operating Frequency
For 802.11b:
+ 2400 to 2497MHz
For 802.11g:
+ 2400 to 2483.5MHz

Channel Numbers
+ 11 Channels (FCC)
+ 13 Channels (ETSI)

Data Rates 1
+ 802.11g: 108,54, 48, 36, 24, 18, 12, 9 and 6Mbps
+ 802.11b: 11, 5.5, 2, and 1Mbps

Maximum Transmit Output Power 2
17dBm (typical)

Antennas
Embedded 9dBi patch antenna
RN-P N type connector for optional antenna5

Receiver Sensitivity
+ For 802.11b, at 8% PER:
11Mbps: –83dBm
2Mbps:–89dBm
+ For 802.11g, at 10% PER:
6Mbps:–87dBm
9Mbps:–86dBm
12Mbps:–85dBm
18Mbps:–83dBm
24Mbps:–80dBm
36Mbps:–76dBm
48Mbps:–71dBm
54Mbps:–66dBm

Security
+ 64/128/152-bit WEP data encryption
+ WPA-PSK, WPA2-PSK
+ WPA-EAP, WPA2-EAP
+ TKIP, AES support
+ MAC address filtering user access
+ WLAN STA partitioning
+ Multiple SSID for network segmentation
+ SSID broadcast disable function
+ 802.1Q VLAN Tagging
+ Rouge AP detectionl

Quality of Service
+ Wireless Multimedia (WMM)

Configurable Operation Modes
+ Access Point
+ WDS with AP
+ WDS
+ Wireless Client

Performance Enhancement
+ AP grouping for load balance

Device Management
Web Browser Interface:
+ HTTP
+ Secure HTTP (HTTPS)
AP Manager II
SNMP support:
+ D-View module
+ Private MIB
Command Line Interface:
+ Telnet
+ SSH

Diagnostic LEDs
+ Power
+ LAN
+ WLAN

Accessories Provided for Outdoor Installation
+ PoE base unit
+ Ethernet cable (4 meters long)
+ Set of grounding wires
+ Wall mount
+ Pole mount (option) 3

Operating Voltage : 48VDC +/- 10% for PoE
Power Consumption : + 13.5 watts (max.) with PoE (with heater ON) 4
Dimensions : + 190 (L) x 160 (W) x 55 (H) mm
Weight : + 649g (Without mounting kit)
Operating Temperature : -20˚ to +60˚ C
Storage Temperature : -20˚ to +65˚ C
Operating Humidity : 10% to 90% non-condensing, all-weather enclosure
Regulation Certification
+ FCC Class B
+ CE
+ IP 65
+ C-Tick

VeriFone VX610 Specification

UBL — Tue, 05 May 2009 11:02:07 +0000

The Verifone VX610 is really different with the VeriFone VX510. VeriFone VX610 is a mobile terminal processes transactions over the wireless GPRS network and allows for the merchant the flexibility to be anywhere and still process their payments. Below is about Technical specification of the VeriFone VX 610.

Processor : 32-bit microprocessor
Memory : 6 MB [4 MB of Flash 2 MB of SRAM]
Display : 128 X 64 pixel graphiocal LCD with backlighting,supports 8 lines X 21 Characters
Magnetic Card Reader : Triple track (tracks 1, 2, 3), high coercivity, bi-directional
Primary Smart Card : ISO 7816,18V,5V or syncronous and asynchronous cards, EMV Level 1 and 2 Type Approved.
SAM Card Reader : 1 or Security Access Modules [SAMs]
Keypad : 3X4 numeric keypad, plus 8 soft function keys and 4 screen addressable keys
Peripheral Ports : One RS-232 port and 1 telco port support peripherals including check reader
Printer : Integrated thermal with graphics capabilities, 18 lines per second, 24 or 32 columns; standard roll paper 58 mm (2.25 in.) x 25 M (82 ft.), single ply
Modem : Standard 14.4 kbps modem supporting { Bell 103/212a, CCITT V.21/V.22/V.22bis/V.32/V.32bis, 300/1200/2400/14.4kbps, synchronous and asynchronous}
Wireless Modem : Support Wide Area Wireless GSM/GPRS on 900/1800 MHz or 850/1900MHz, CDMA200 1X on 800/1900, and Local Area Wireless Wi-Fi 8002.11b
Protocols : Application selects between asynchronous protocol [Visa 1, Visa 2, etc] and synchronous protocols including ISO 8583/SDLCI, IP enable with optional TCP/IP protocol stack

Security : PCIE PFD approved,3DES encryption Master/session and DUKPT key management, VeriShield file authentication, SSL, API for secured IP transactions

Physical : Length 209mm [8in], Widht : 102mm [4in], Height : 70mm [2.8in], Weight Device 798g [1.5lbs]

Environmental : 0 to 40 C (32 to 104 F) operating temperature; 5% to 90% relative humidity, non-condensing

Voltage : AC input 100 – 240 VAC, 50/60 Hz; DC Output 8.6 – 9.4 VDC, 4.0 Amp

This device already entry to the Indonesia market and also already got Type Approval certtificate

7 Point to Set Up Network Configuration

UBL — Tue, 24 Mar 2009 11:45:42 +0000

I would like to add an important point regarding to set up Network of D-Link DWL-3200AP Wireless Access Point. There are three Operational Modes to set up of DWL-3200AP but i want to inform one of them. Here are 7 point to set up the Network of DWL-3200AP.

You will need broadband Internet access.
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to a Router. (See the printed Quick Installation Guide included with your router.)
Connect the Ethernet Broadband Router to the PoE base unit. (See the printed Quick Installation Guide included with the DWL-3200AP.)
Connect the DWL-3200AP to the PoE base unit. (See the printed Quick Installation Guide included with the DWL-3200AP.)
If you are connecting a desktop computer to your network, install the D-Link WDA-2320 wireless PCI adapter into an available PCI slot on your desktop computer. (See the printed Quick Installation Guide included with the network adapter.)
Install the drivers for the D-Link WNA-2330 wireless Cardbus adapter into a laptop computer. (See the printed Quick Installation Guide included with the WNA-2330.)

Orange launches its Wireless Radio the vintage Liveradio

UBL — Fri, 20 Mar 2009 04:15:03 +0000

vintage Liveradio: digital gets a vintage makeover! To enhance your enjoyment of listening to web radio stations at home, Orange is launching the vintage Liveradio:

access to over 5 000 radio stations and 11 000 podcasts (news, sport, music and comedy) from around the world
personalise content and easily download tracks from http://liveradio.orange.fr
excellent sound quality
easy-to-use – thanks to its special remote control

with its wooden casing, the vintage Liveradio has a “retro” look
Connect it via Wi-Fi or Ethernet to your livebox or any other Internet router, so that you can listen to it anywhere in the house. The vintage Liveradio also has a media player function, so that you can listen to music stored on your computer. It is easy to use with its three pre-set buttons on the front, an LCD screen, an infrared remote control, and eight buttons giving you direct access to radio stations. It has a USB port so that you can listen to audio content (WMA, MP3, WAV and Real) with its key, an MP3 player or its integrated FM Tuner. With the liveradio interfaces, you can save your favourite tracks thanks to the “favourites” button check out this press release on orange.com

WB01GS Wireless USB Adapter

UBL — Sat, 07 Mar 2009 05:00:44 +0000

The WB01GS Wireless USB Adapter is one of your solution who want to get high speed internet access so if you are Looking for an easy way to integrate your Desktop or Notebook into your wireless network? You might check it out. The GIGABYTE WB01GS Wireless USB Adapter is Plug-and-Play, and connects to any USB-ready PC—just plug it in and you’re ready to share data, printers, or high speed Internet access over your existing wireless network. For Desktop installation, no need to open your PC’s case. Like all USB Plug-and-Play devices, it’s a breeze to setup.

Don’t be fooled by its small and convenient size, the GIGABYTE’s WB01GS Wireless USB Adapter is powerful. Enabling 54 Mbps wireless Internet sharing – 5 times faster than most Wireless USB adapters. High-level WEP encryption protects your network from would be hackers without a hit on performance.

Features a USB 2.0 interface that is up to 40 times faster than USB 1.1 allowing you to realize full 54 Mbps speed of the 802.11g wireless standard. New antenna technology provides superior range above previous-generation 802.11b adapters. The WB01GS supports office roaming for notebook PC users for shared broadband Internet access and resources. GIGABYTE’s Wireless Utility lets you create profiles that reflect specific WLAN settings for each different location or access point you connect to – the coffee shop, University, or at home. So, for powerful Notebook flexibility and wireless convenience, GIGABYTE WB01GS Wireless USB Adapter is what you’re looking for!

Features

Conform to IEEE 802.11b and 802.11g specifications
Wireless transmits data rate up to the maximum speed of 54Mbps
Dynamically scales the data rate
Proprietary Smartsetup 3™ to secure wireless network easily
Support 64-bit /128-bit WEP encryption, TKIP, AES, 802.1x, WPA and WPA2
Support Quality of Service WMM
Seamless roaming between 802.11b and 802.11g networks
40 faster than USB v1.1
Automatic power management to reduce battery consumption.
Driver supports Windows 98SE/Me/2000/XP.

Hardware Installation Wireless G Internet Camera

UBL — Tue, 03 Mar 2009 04:12:52 +0000

If you want to know more about the Wireless G internet Camera D-Link DCS-920 information, you could find on the type approval of Wireless G internet Camera device. So I’m going to inform you how to install the Wireless G Internet Camera D-Link DCS-920.

Hardware Installation

Connect the Wireless Antenna (DCS-920 only)
Screw the Wireless antenna onto the Internet camera’s antenna connector.

Connect the Ethernet Cable
Connect the Ethernet cable to the Internet camera’s Ethernet port and attach the other end of the cable to the network. Note: This step is necessary to configure DCS-920.

Attach the Power Adapter
Attach the power adapter to the Internet camera’s power socket and connect it to a power outlet.

The camera’s LED will light red when it receives power. The LED will light green after the camera connects to the network. The LED will flash green while accessing the camera.

Please refer to the Manual on the CD to install the software utility and finish installation.