UmbulTech.Com

You know that the Wireless Day and Night network camera D-Link DCS-3430 already certified by DGPT ? I’m not going to inform you about the type approval process but i just want to inform you a simple step for hardware installation of the D-Link DCS-3430.

The D-Link DCS-3430 Day & Night Network Camera is a powerful surveillance system that can connect to your network. The DCS-3430 differs from a conventional PC Camera because it is a stand-alone system with a built-in CPU and Web server, providing low-cost solution capable of solving demanding security and home/office monitoring needs. It is designed with an aluminum cast for maximum heat dissipation and better protection. Snapshot enables you to save a snapshot image directly form a Web browser to a local hard drive without installing any software. H.264 can reduce the size of video stream around 80% compared with the Motion JPEG and as much as 50% when compared with MPEG4. Using less network bandwidth and storage space allows the DCS-3430 to be a very cost effective network camera.

With 0.5 lux light sensitivity, the DCS-3430 is capable of capturing video in rooms with minimal lighting. With optional Day & Night Auto Iris lens, IR LED lens or night vision illuminator, you can customize your surveillance application to enable low light or night vision video streaming. You can also zoom in using the DCS-3430’s 16x digital zoom feature. The DCS-33430 gives you the ability to monitor video and audio in you home/office using an Internet browser anywhere in the world! Simple installation procedures, along with the built-in Web-based interface offers easy integration to your network environments.

Hardware Installation for D-Link DCS-3430 Day & Night Network Camera
Continue reading…

You know that the Mobile wireless Router D-Link DIR-412 allows you to connect a 3.5G USB adapter for mobile broadband connectivity. The incoming connection is then shared via a 802.11n wireless network. The standard Ethernet port can be used as an primary or backup connection.

3 points of benefits for D-Link DIR-412 are as below:

• Provides high-speed connectivity in areas without conventional 802.11 wireless access
• Compatible with DO/CDMA/HSUPA/UMTS networks
• Supports WAN failover for persistent connections

The technical specification of Mobile Wireless Router D-link DIR-412 are as below:

Continue reading…

Verizon Wireless and CASIO today introduced the new CASIO® G’zOne (pronounced Jeez_wun) Rock™ to Verizon Wireless’ growing line-up of rugged phones. Perfect for customers with active lifestyles, the Rock’s advanced G’zGear software operates in six modes, including Earth Compass, Walking Counter, Thermometer, Astro Calendar, Sunrise Sunset and Tides, with the help of its Triple Sensor technology. Whether your lifestyle has the demands of an avid fisher, hunter, hiker or climber, the Rock is prepared to
Continue reading…

We think that you have read our previous posted about technical specification of DAP-3220, Today Umbultech is going to inform you the 5 important point about the DAP-3220 installations. The D-Link DAP-3220 lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

Continue reading…

The DAP-3220 Wireless 108G Exterior Access Point is supports 64/128/152-bit WEP data encryption and WPA/WPA2 security functions. In addition, it provides MAC Address Filtering to control user access, and the Disable SSID Broadcast function to limit outsiders’ access to the internal network. UmbulTech is not going to tell you about the The D-Link DAP-3220 Wireless 108G Exterior Access Point of feature and benefits. But UmbulTech want to inform you about the Technical specification about this D-Link DAP-3220.

Technical Specification of D-Link DAP-3220 Wireless 108G Exterior Access Point

Standards
+ IEEE 802.11b/g WLAN
+ IEEE 802.3/802.3u Ethernet
+ IEEE 802.3x Flow Control

Ethernet Interface
+ 10/100BASE-TX Ethernet port

Radio and Modulation Type
For 802.11b:
DSSS:
+ DBPSK @ 1Mbps
+ DQPSK @ 2Mbps
+ CCK @ 5.5 and 11Mbps
For 802.11g:
OFDM:
+ BPSK @ 6 and 9Mbps
+ QPSK @ 12 and 18Mbps
+ 16QAM @ 24 and 36Mbps
+ 64QAM @ 48 and 54Mbps
DSSS:
+ DBPSK @ 1Mbps
+ DQPSK @ 2Mbps
+ CCK @ 5.5 and 11Mbps

Operating Frequency
For 802.11b:
+ 2400 to 2497MHz
For 802.11g:
+ 2400 to 2483.5MHz

Channel Numbers
+ 11 Channels (FCC)
+ 13 Channels (ETSI)

Data Rates 1
+ 802.11g: 108,54, 48, 36, 24, 18, 12, 9 and 6Mbps
+ 802.11b: 11, 5.5, 2, and 1Mbps

Maximum Transmit Output Power 2
17dBm (typical)

Antennas
Embedded 9dBi patch antenna
RN-P N type connector for optional antenna5

Receiver Sensitivity
+ For 802.11b, at 8% PER:
11Mbps: –83dBm
2Mbps:–89dBm
+ For 802.11g, at 10% PER:
6Mbps:–87dBm
9Mbps:–86dBm
12Mbps:–85dBm
18Mbps:–83dBm
24Mbps:–80dBm
36Mbps:–76dBm
48Mbps:–71dBm
54Mbps:–66dBm

Security
+ 64/128/152-bit WEP data encryption
+ WPA-PSK, WPA2-PSK
+ WPA-EAP, WPA2-EAP
+ TKIP, AES support
+ MAC address filtering user access
+ WLAN STA partitioning
+ Multiple SSID for network segmentation
+ SSID broadcast disable function
+ 802.1Q VLAN Tagging
+ Rouge AP detectionl

Quality of Service
+ Wireless Multimedia (WMM)

Configurable Operation Modes
+ Access Point
+ WDS with AP
+ WDS
+ Wireless Client

Performance Enhancement
+ AP grouping for load balance

Device Management
Web Browser Interface:
+ HTTP
+ Secure HTTP (HTTPS)
AP Manager II
SNMP support:
+ D-View module
+ Private MIB
Command Line Interface:
+ Telnet
+ SSH

Diagnostic LEDs
+ Power
+ LAN
+ WLAN

Accessories Provided for Outdoor Installation
+ PoE base unit
+ Ethernet cable (4 meters long)
+ Set of grounding wires
+ Wall mount
+ Pole mount (option) 3

Operating Voltage : 48VDC +/- 10% for PoE
Power Consumption : + 13.5 watts (max.) with PoE (with heater ON) 4
Dimensions : + 190 (L) x 160 (W) x 55 (H) mm
Weight : + 649g (Without mounting kit)
Operating Temperature : -20˚ to +60˚ C
Storage Temperature : -20˚ to +65˚ C
Operating Humidity : 10% to 90% non-condensing, all-weather enclosure
Regulation Certification
+ FCC Class B
+ CE
+ IP 65
+ C-Tick

The Verifone VX610 is really different with the VeriFone VX510. VeriFone VX610 is a mobile terminal processes transactions over the wireless GPRS network and allows for the merchant the flexibility to be anywhere and still process their payments. Below is about Technical specification of the VeriFone VX 610.

Processor : 32-bit microprocessor
Memory : 6 MB [4 MB of Flash 2 MB of SRAM]
Display : 128 X 64 pixel graphiocal LCD with backlighting,supports 8 lines X 21 Characters
Magnetic Card Reader : Triple track (tracks 1, 2, 3), high coercivity, bi-directional
Primary Smart Card : ISO 7816,18V,5V or syncronous and asynchronous cards, EMV Level 1 and 2 Type Approved.
SAM Card Reader : 1 or Security Access Modules [SAMs]
Keypad : 3X4 numeric keypad, plus 8 soft function keys and 4 screen addressable keys
Peripheral Ports : One RS-232 port and 1 telco port support peripherals including check reader
Printer : Integrated thermal with graphics capabilities, 18 lines per second, 24 or 32 columns; standard roll paper 58 mm (2.25 in.) x 25 M (82 ft.), single ply
Modem : Standard 14.4 kbps modem supporting { Bell 103/212a, CCITT V.21/V.22/V.22bis/V.32/V.32bis, 300/1200/2400/14.4kbps, synchronous and asynchronous}
Wireless Modem : Support Wide Area Wireless GSM/GPRS on 900/1800 MHz or 850/1900MHz, CDMA200 1X on 800/1900, and Local Area Wireless Wi-Fi 8002.11b
Protocols : Application selects between asynchronous protocol [Visa 1, Visa 2, etc] and synchronous protocols including ISO 8583/SDLCI, IP enable with optional TCP/IP protocol stack

Security : PCIE PFD approved,3DES encryption Master/session and DUKPT key management, VeriShield file authentication, SSL, API for secured IP transactions

Physical : Length 209mm [8in], Widht : 102mm [4in], Height : 70mm [2.8in], Weight Device 798g [1.5lbs]

Environmental : 0 to 40 C (32 to 104 F) operating temperature; 5% to 90% relative humidity, non-condensing

Voltage : AC input 100 – 240 VAC, 50/60 Hz; DC Output 8.6 – 9.4 VDC, 4.0 Amp

This device already entry to the Indonesia market and also already got Type Approval certtificate

I would like to add an important point regarding to set up Network of D-Link DWL-3200AP Wireless Access Point. There are three Operational Modes to set up of DWL-3200AP but i want to inform one of them. Here are 7 point to set up the Network of DWL-3200AP.

1. You will need broadband Internet access.
2. Consult with your Cable or DSL provider for proper installation of the modem.
3. Connect the Cable or DSL modem to a Router. (See the printed Quick Installation Guide included with your router.)
4. Connect the Ethernet Broadband Router to the PoE base unit. (See the printed Quick Installation Guide included with the DWL-3200AP.)
5. Connect the DWL-3200AP to the PoE base unit. (See the printed Quick Installation Guide included with the DWL-3200AP.)
6. If you are connecting a desktop computer to your network, install the D-Link WDA-2320 wireless PCI adapter into an available PCI slot on your desktop computer. (See the printed Quick Installation Guide included with the network adapter.)
7. Install the drivers for the D-Link WNA-2330 wireless Cardbus adapter into a laptop computer. (See the printed Quick Installation Guide included with the WNA-2330.)

vintage Liveradio: digital gets a vintage makeover! To enhance your enjoyment of listening to web radio stations at home, Orange is launching the vintage Liveradio:

• access to over 5 000 radio stations and 11 000 podcasts (news, sport, music and comedy) from around the world
• personalise content and easily download tracks from http://liveradio.orange.fr
• excellent sound quality
• easy-to-use – thanks to its special remote control

with its wooden casing, the vintage Liveradio has a “retro” look
Connect it via Wi-Fi or Ethernet to your livebox or any other Internet router, so that you can listen to it anywhere in the house. The vintage Liveradio also has a media player function, so that you can listen to music stored on your computer. It is easy to use with its three pre-set buttons on the front, an LCD screen, an infrared remote control, and eight buttons giving you direct access to radio stations. It has a USB port so that you can listen to audio content (WMA, MP3, WAV and Real) with its key, an MP3 player or its integrated FM Tuner. With the liveradio interfaces, you can save your favourite tracks thanks to the “favourites” button check out this press release on orange.com

The WB01GS Wireless USB Adapter is one of your solution who want to get high speed internet access so if you are Looking for an easy way to integrate your Desktop or Notebook into your wireless network? You might check it out. The GIGABYTE WB01GS Wireless USB Adapter is Plug-and-Play, and connects to any USB-ready PC—just plug it in and you’re ready to share data, printers, or high speed Internet access over your existing wireless network. For Desktop installation, no need to open your PC’s case. Like all USB Plug-and-Play devices, it’s a breeze to setup.

Don’t be fooled by its small and convenient size, the GIGABYTE’s WB01GS Wireless USB Adapter is powerful. Enabling 54 Mbps wireless Internet sharing – 5 times faster than most Wireless USB adapters. High-level WEP encryption protects your network from would be hackers without a hit on performance.

Features a USB 2.0 interface that is up to 40 times faster than USB 1.1 allowing you to realize full 54 Mbps speed of the 802.11g wireless standard. New antenna technology provides superior range above previous-generation 802.11b adapters. The WB01GS supports office roaming for notebook PC users for shared broadband Internet access and resources. GIGABYTE’s Wireless Utility lets you create profiles that reflect specific WLAN settings for each different location or access point you connect to – the coffee shop, University, or at home. So, for powerful Notebook flexibility and wireless convenience, GIGABYTE WB01GS Wireless USB Adapter is what you’re looking for!

Features

• Conform to IEEE 802.11b and 802.11g specifications
• Wireless transmits data rate up to the maximum speed of 54Mbps
• Dynamically scales the data rate
• Proprietary Smartsetup 3™ to secure wireless network easily
• Support 64-bit /128-bit WEP encryption, TKIP, AES, 802.1x, WPA and WPA2
• Support Quality of Service WMM
• Seamless roaming between 802.11b and 802.11g networks
• 40 faster than USB v1.1
• Automatic power management to reduce battery consumption.
• Driver supports Windows 98SE/Me/2000/XP.

If you want to know more about the Wireless G internet Camera D-Link DCS-920 information, you could find on the type approval of Wireless G internet Camera device. So I’m going to inform you how to install the Wireless G Internet Camera D-Link DCS-920.

Hardware Installation

Connect the Wireless Antenna (DCS-920 only)
Screw the Wireless antenna onto the Internet camera’s antenna connector.

Connect the Ethernet Cable
Connect the Ethernet cable to the Internet camera’s Ethernet port and attach the other end of the cable to the network. Note: This step is necessary to configure DCS-920.

Attach the Power Adapter
Attach the power adapter to the Internet camera’s power socket and connect it to a power outlet.

The camera’s LED will light red when it receives power. The LED will light green after the camera connects to the network. The LED will flash green while accessing the camera.

Please refer to the Manual on the CD to install the software utility and finish installation.